• TEL: 0086-13083697781

equivalent hardness and tensile strengths

Get Price

We can supply you need equivalent hardness and tensile strengths.

AISI 4130 Steel - 25CrMo4 - JIS SCM430 - GB 30CrMo

The hardening will cause the martensite to be made after quenching. So hardness and tensile strength get raise dramatically and with some brittleness. Smaller sections of 4130 might be quenched in oil, bigger sections in water. Tempering. Reheat to the temperature which will result in the required hardness. AMTmetalTech Hardness Conversion with Tensile StrengthHardness inspection is popular and simple for steel. There is some relation between Tensile Strength with Hardness for steel because both Tensile Strength and Hardness depend on the Deforming capability. The higher tensile strength, the higher capability of anti-deforming, and the higher hardness.

Core Hardness and Surface Hardness in Fasteners - Wilson

Core Hardness and Tensile Strength. As stated above, for the materials we use, there is a good correlation between core hardness and tensile strength. Because of this correlation, most standards base their core hardness requirements on the desired tensile strength of the parts. The standards tend to set the minimum core hardness at a value Difference Between Strength and HardnessStrength is a basic property of the solid material. Hardness is not a property of solid material; in fact, it is the property of solid surface. Strength of a solid material can be determined by standard tensile or compressive testing in Universal Testing Machine (UTM). Hardness can be measured by several testing such as:Rockwell hardness test EN 1.7131 Steel 16MnCr5 Material Equivalent, Composition EN 1.7131 Steel 16MnCr5 Material. EN 1.7131 steel (16MnCr5 material) is an European standard carburized steel (case hardening steel) with good hardenability and machinability. For larger cross-section parts, high surface hardness and wear resistance can be obtained after heat treatment, and low-temperature impact toughness is also high.

EN 1.7131 Steel 16MnCr5 Material Equivalent, Composition

EN 1.7131 Steel 16MnCr5 Material. EN 1.7131 steel (16MnCr5 material) is an European standard carburized steel (case hardening steel) with good hardenability and machinability. For larger cross-section parts, high surface hardness and wear resistance can be obtained after heat treatment, and low-temperature impact toughness is also high. ENGINEERING CONCEPTS:Relationship Between Hardness Mar 07, 2001 · A comparison of ultimate tensile strength with Brinell hardness is shown in Fig. 2 for several metals. Many of the copper-base alloys have a much higher UTS than predicted and the gray irons tend to have a much lower UTS than that predicted. In the case of gray iron, the graphite flakes serve as crack initiators in tension, whereas these flakes ENGINEERING CONCEPTS:Relationship Between Hardness Mar 07, 2001 · A comparison of ultimate tensile strength with Brinell hardness is shown in Fig. 2 for several metals. Many of the copper-base alloys have a much higher UTS than predicted and the gray irons tend to have a much lower UTS than that predicted. In the case of gray iron, the graphite flakes serve as crack initiators in tension, whereas these flakes

HARDNESS CONVERSION CHART - Interlloy

HARDNESS CONVERSION CHART Brinell Tensile Strength Sclerscope Hardness Number Rockwell Diamond Pyramid Scale HV10 HV30 Dia. Imp. for 10mm Ball Carbide Ball Standard Ball Tons/ inch2 1000lb/ inch 2 kg/ mm Mpa N/mm2 Hardness Number A Scale C Scales 96 85.6 67.7 900 95 85 67 880 93 84.7 66.3 860 92 84.2 65.5 840 90 83.8 64.8 820 88 83 HARDNESS CONVERSION CHART - InterlloyHARDNESS CONVERSION CHART Brinell Tensile Strength Sclerscope Hardness Number Rockwell Diamond Pyramid Scale HV10 HV30 Dia. Imp. for 10mm Ball Carbide Ball Standard Ball Tons/ inch2 1000lb/ inch 2 kg/ mm Mpa N/mm2 Hardness Number A Scale C Scales 96 85.6 67.7 900 95 85 67 880 93 84.7 66.3 860 92 84.2 65.5 840 90 83.8 64.8 820 88 83 HARDNESS CONVERSION TABLE - DEL METALSApproximate equivalent hardness numbers for Brinell hardness numbers for steel and Number 3000-Kg Load 10 mm Tungsten Carbide Ball Rockwell Hardness Number Tensile Strength (approximate) B-Scale 100-Kg Load 1/16 in. Dia. Ball C-Scale 150-Kg Load Brale Penetrator Ksi Mpa 2.25 745 - 65.3 - - 2.35 682 - 61.7 - - 2.4 653 - 60 - - 2.45 627 - 58

Hardness Conversion Chart Brinell and Rockwell

Hardness Conversion Table. Brinell Hardness:Rockwell Hardness:Tensile Strength:A Scale:B Scale:C Scale:3000KG Ball:60KG:100KG:150KG (Approx.) 400:72.0 43.1:202,000:388:71.4 41.8:195,000:375:70.6 40.4:188,000:363:70.0 39.1:182,000:352:69.3:110.0:37.9:176,000:341:68.7:109.0:36.6:170,000:331:68.1:108.5:35.5:166,000:321:67.5:108.0:34.3:160,000: INCONEL alloy 625 - Special Metals CorporationTensile Properties and Hardness Typical tensile properties of annealed and solution-treated material from room to elevated temperature are shown in Figures 3, 4, and 5. The approximate relationship between the hardness and tensile and yield strength of strip is shown in Figure 6. Increased tensile properties for service at eFunda:Convert Hardness:Tensile Strength (Approx.)An approximate relationship between the hardness and the tensile strength (of steel) is, where HB is the Brinnell Hardness of the material, as measured with a standard indenter and a 3000 kgf load. Convert Approx. TS MPa (suggested range:390 ~ 2450 MPa) Approx. TS 1420

eFunda:Convert Hardness:Tensile Strength (Approx.)

Approx. TS. An approximate relationship between the hardness and the tensile strength (of steel) is, where HB is the Brinnell Hardness of the material, as measured with a standard indenter and a 3000 kgf load. Convert Approx. TS MPa. (suggested range:390 ~ 2450 MPa) Approx. TS 1420 MPa approximately* =. Hardness. vickers hardness to tensile strength equationAn approximate relationship between the hardness and the tensile strength (of steel) is, where HB is the Brinnell Hardness of the material, as measured with a standard indenter and a 3000 kgf load. A square-based pyramid indenter whose opposite sides meet at the apex at an angle of 136° is employed in Vickers hardness test. window.attachEvent( Hardness and Tensile Strength of Steels:Brinell and Brinell Hardness Rockwell Hardness; Tungsten Carbide Ball 3000 KG A Scale 60 kg B Scale 100 kg C Scale 150 kg Tensile Stength (approx.) 86 68 85 68 85 67 767:85 66 757:84 66 745:84 65 733:84 65 722:83 64 712:83 64 710:83 63 698:83 62 684:82 62 682:82 62 670:82 61 656:81 60 653:81 60 647:81 60

Get Price

We can supply you need equivalent hardness and tensile strengths.